Appliance Diagram - CASO DESIGN VRH 490 advanced Mode D'emploi Original

16.1 Appliance diagram

1 vacuum hose for vacuuming of canisters
2 upper gasket + 6 lower gasket
3 handle
4 sealing profile (presses the bag against the sealing bar)
5 Hook for latching of cover
7 vacuum chamber with removable drip tray for liquids
8 Sealing bar: Contains a heating wire covered with teflon which allows the bag to
seal but not to stick to the wire. Place the bag over this sealing bar.
WARNING
The sealing bar gets very hot.
Please observe the following safety notice in order not to burn yourself or others.
► To avoid getting burned, never touch the sealing bar directly after sealing process.
Please note
► Do not remove the Teflon tape (T).
37