Locating A Specific Playback Position - Memory Play; Memorizing And Locating A Specific Playback Position; The Accuracy Of The Linear Counter - Sony TC-K615S Mode D'emploi

2 1
POWER
→
ON
COUNTER
RESET MEMORY
POWER
PAUSE REC MUTE
·
p 0 ) P R
0 AMS )
3
1
RESET MEMORY
2
RESET MEMORY
3
4
5
24
MPX FILTER
Ø ON ø OFF
4
3
DOLBY NR BIAS REC LEVEL
OFF 2
• B • •
C
S 1
0
– + – +
EJECT
MONITOR CALIBRATION
REC
§
r
·
0
REC LEVEL
5
6
7
8
BALANCE
•
9
•
10
L R
HEADPHONES
MEMORY
MEMORY
Locating a Specific
Playback Position
— Memory Play
The Memory Play function allows you to
use the counter to record a specific position
on a cassette for fast relocation and
automatic playback later.
Memorizing and Locating a
Specific Playback Position
1
Press MEMORY to turn on the
Memory Play function.
2
Press RESET to reset the counter at
the position to be memorized.
The position is memorized.
3
While holding down · , press 0
to return to the memorized
position.
Returning to the memorized
position while the unit is
stopped
— Memory Stop
If you press only the 0 button when the
MEMORY indicator is on and the unit is
stopped, the tape rewinds and then stops
when the counter reaches 0.00.
Be sure that the unit is stopped before
turning the Memory Stop function on,
otherwise the Multi-AMS function will
operate.
To turn off the Memory Play
function
Press the MEMORY button, so that the
MEMORY indicator disappears.
Note on Memory Play/Stop
The tape actually rewinds to slightly short
of 0.00.
Do not turn off the power while
using the counter
Turning the power off, then on again resets
the counter to 0.00.
The Accuracy of the Linear
Counter
Since the counter is not a digital clock, it
will differ from the actual elapsed playback
or recording time by a few minutes,
depending on such factors as tape length
and hub size.