Carton Contents; Unpacking And Cleaning - Delta 17-959L Manuel D'utilisation

1
2
1. Drill Press Head
2. Table
3. Table Bracket and Column
4. Light
5. Base
6. Chuck
7. Handle (3)
8. Spindle Adapter
9. Drift Key
10. 5mm Hex Wrench
11. 3mm Hex Wrench
12. Table Raising and Lowering Handle
13. Table Clamp Handle
14. Chuck Key
15. (3) M8 x 1.25 x 125mm carriage head screws,
(4) flat washers, (2) lockwashers, and (2) hex nuts
(for fastening drill press to a supporting surface)
16. M10 x 1.5 x 40mm Hex Head Screws (4)
17. M6 x 1 x 12mm Hex Cap Head Screw (2)
18. 1/4" Washer
19. Cord Strain Relief
20. Cord Clamp (2)
21. Cord Bushing
22. 12mm Hex Head Bolt
23. Flat Washer
24. Screws (2)
25. Springs (2)
26. Forward tilt levers
27. Laser
28. Laser Alignment Rod
29. 4mm Hex Wrench
30. Hex Head Cap Screws (2)
31. 12mm Hex Wrench (Not Shown)

UNPACKING AND CLEANING

Carefully unpack the machine and all loose items from the shipping container(s). Remove the rust-preventative oil from
unpainted surfaces using a soft cloth moistened with mineral spirits, paint thinner or denatured alcohol.
FIRE HAZARD. Do not use highly volatile solvents such as gasoline, naphtha, acetone or lacquer
NOTICE
thinner for cleaning your machine. Such materials can easily catch fire. After cleaning, cover the unpainted surfaces
with a good quality household floor paste wax.

CARTON CONTENTS

4
3
5
8
6
7
8
9
10
11
17
19
20
21
24
30
29
12
13
14
15
16
18
22 23
26
25
27
28