Fortress Building Products V Série Instructions D'installation page 34

3. Use an Adjustable Angel Finder to measure needed angle
to make the Wood Top Rail Cap flush with the post. As
shown in Fig. 1.
4. Test fit & Install Wood Top Cap. Re-cut wood if required.
Fig. 1
Step 2: Install Cap Rail Clips
1. Cap Rail Clips should be equally spaced along the length of
Wood Top Cap (Max Spacing is 28" [711mm]).
2. Secure Cap Rail Clips to Wood Top Rail with
provided screws. As shown in Fig. 1 below.
Fig. 1
STAIR BRACKET: BRACKET CAP, POST BASE COVER & PRESSED
• Reference Bracket Cap, Post Base Cover & Pressed Dome/
Ball Cap installation instructions on pages 16 & 17.
34
Fig. 2
DOME/BALL CAP INSTALLATION
V-SERIES: VERTICAL CABLE INSTALLATION