Christopeit Sport NAXXOS ENERGY Notice De Montage Et D'utilisation page 22

Step 5:
Installation of the handgrip cover sets (8+48) at connecting tubes (7).
1. Mount the left handgrip cover set (8L-1+8L-2) to left connection tube
(7L) and secure with screws (31).
2. Install the right handgrip cover set (48R-1+48R-2) to the right connection
tube (7R) and secure with screws (31).
Step 6:
Attach the pulse grip (55) at handlebar support (3).
1. Put the computer cover (37) onto the ends of pulse grip (55).
2. Guide the pulse grip (55) through the appropriate holder of support (3)
and adjust the holder so that the holes and threats align. Put on each
screw M8x25 (9) a spring washer (12) and washer 8/16 (14) and tighten
the pulse grip (55) at the support (3) firmly.
3. Put the pulse cable (51) through the hole at support (3) into top position.
22