2.2. Notice regarding power
disconnection
• To disconnect the power supply from the prod-
uct, pull the mains adapter from the socket
outlet. Always pull on the mains adapter/mains
plug itself when removing it from the socket.
To prevent damage, never pull on the cable.
• When not in use, pull the mains adapter from
the socket outlet or use a master-slave pow-
er strip to prevent power consumption when
switched off.
• Any sockets used for charging the battery
must be close to the device and easily accessi-
ble. Position the cables so that they cannot be
stepped on or tripped over.
• Only operate the mains adapter on earthed
socket outlets with 230 V ~ 50 Hz. If you are not
sure about the power supply at the set-up lo-
cation, please ask your power supplier.
• To prevent the mains adapter from overheat-
ing, do not cover it.
DE
EN
FR
NL
97 of 338