6. Flash
If there is insufficient light for the photo, the built-in flash can
provide the additional light required.
Press the flash button repeatedly to select the following flash
settings:
AUTO: the flash will be activated automatically
when the shooting conditions require additional
lighting.
Flash is triggered before the actual flash; used to
prevent "red-eye" effect. The camera detects the
brightness of subjects and only uses the flash if
necessary.
Flash always on
"Slow Sync": the flash is synchronised with slow
shutter speed.
Flash always off
The flash only works in single shot and self-timer mode. It cannot
be used for photo sequences and video recordings.
Using the flash increases battery usage. If the battery is almost
flat, the flash will take longer to load.
122 of 338