Cleaning And Care; Storage - SilverCrest SEMD 12 A2 Mode D'emploi

Cleaning and care

RISK OF ELECTRIC SHOCK
► Always remove the plug from the mains
power socket before you clean the appliance.
Ensure you never submerse the motor
unit in liquid, and never allow liquid
to enter the motor unit housing
CAUTION! MATERIAL DAMAGE!
► Do not use abrasive, chemical or caustic
cleaning agents to clean this appliance.
They can cause damage to the surfaces.
► Do not clean the components of this appliance
in a dishwasher!
♦ If assembled, take the appliance apart to clean it.
–
Turn the rotary switch
the lid with the motor unit
–
Rotate the lid
unit . Press the two catches
project through the lid
and push them out of the lid
time.The motor unit
the lid .
–
Take the ice scrapers
–
Remove the beakers
SEMD 12 A2
.
to to remove
.
together with the motor
which
gently inwards
at the same
will now detach from
out of the beakers
from the base
♦ Clean the motor unit
every use. If there is heavy soiling, add mild
detergent to the cloth. Rinse detergent residues
off with clear water. Ensure that there are no
detergent residues on the appliance, and that the
appliance is completely dry before renewed use.
♦ Allow the beakers
perature before cleaning them.
Wash the beakers
lid in lukewarm water with a little washing-up
liquid. Afterwards, rinse these parts with plenty
of clean water to remove all detergent residues.
♦ Wipe the base
heavy soiling, add mild detergent to the cloth.
♦ Ensure that all parts are completely dry before
re-use.

Storage

♦ Always clean the appliance thoroughly before
storing.
♦ Store the appliance in a clean and dry location.
.
.
with a moist cloth after
to warm up to room tem-
, the ice scraper and the
with a damp cloth. If there is
│
GB 27 ■