WIKA CPG1000 Mode D'emploi page 13

3. Specifications
Specifications
One year stability
Permissible
Medium temperature
■
Operating temperature
■
Storage temperature
■
Compensated temperature
range
Temperature coefficients
Display
Pressure units
Recording options
Sampling rate
PC-connection
Power supply
Battery life
■
Low battery indicator
■
EMC
ATEX
■
CSA
■
Ingress protection
Calibration
Dimensions
Weight
1) The measuring ranges thus marked must only be used with clean and non-corrosive gases.
2) For measuring instruments with a max. measuring range of up to 2 bar, operation in the vacuum measuring range is
limited to -350 mbar. (The measuring ranges -1 ... +1 bar and -1 ... +2 bar are excluded.)
3) CPGLog data logger evaluation software is required in order to use the logger functionality.
WIKA Operating Instructions Model CPG1000
0.05 % of span
-10 ... +55 (lower limit above the freezing temperature of the
°C
medium)
°C -10 ... +55
°C -20 ... +70
°C 0 ... 50
0.005 % of span per °C outside the range of 0 ... 50 °C
5 1/2-digit display, character size 16.53 mm (0.65")
20-segment bar graph, 0 ... 100 %
psi, bar, mbar, Kg/cm², inH2O (4 °C, 20 °C or 60 °F), ft H2O (4 °C,
20 °C or 60 °F), cmH2O (4 °C and 20 °C), mH2O (4 °C and 20 °C),
kPa, MPa, inHg, mmHg, TORR, custom engineering unit
Min/Max memory
0.5/second to 10/second, selectable
RS-232, USB with optional USB serial adapter
DC 4.5 V, 3 AA batteries
1500 h without backlight;
2000 h at slow sample rate;
battery life can be displayed on bar graph to indicate the amount
of time left
icon displayed near the end of battery life
Tested to 2004/108/EC, EN 61 326-1 Emission (Groupe 1, Class
B) and Immunity (Appendix A)
II 3G Ex nA IIB T6
Class I, Division 2, Groupe A, B, C, D
IP 65
3.1 calibration certificate per DIN EN 10 204 (option: DKD-calibra-
tion certificate)
mm 111 x 127 x 38
g 455
GB
13