Electric Connection
• Before inserting the power plug into the outlet,
check that the mains voltage to be used match-
es that of the device. You can find the required
information on the nameplate.
• Connect the device only to a correctly installed
safety socket.
Short-interval use
The appliance is suitable for short-interval use of
a maximum of 2 minutes. Allow it to cool for 3 minu-
tes before using it again!
NOTE:
The housing may get hot during operation.
Pulse mode
Switch to pulse mode by turning the control to the
"P" position and then release it. Use the appliance
in this operating mode for a maximum of 2 minutes.
Allow it to cool for 3 minutes before using it again!
Crushing ice cubes
The blades in the mixing vessel are also suitable
for crushing ice cubes.
• Put a maximum of 10 pieces (size approx.
25x25x25 mm) into the mixing vessel.
• Use pulse operation "P" for 1 - 3 seconds.
Repeat the process 8 - 12 times.
WARNING:
• Always remove the plug before cleaning.
Preparation
1. Ensure that the function switch is in the "0" posi-
tion.
2. Place the mixing vessel in position.
3. Now put the ingredients that are to be mixed
into the mixing vessel.
4. Put the lid on.
5. Close the refill opening with the cap.
Mixing
Operation is carried out with the setting control:
Level 0 =
Level 1 =
Level 2 =
P
Adding further ingredients to be mixed
Items to be mixed or spices can be fed in through
the filling aperture.
• Please switch off the machine before doing so.
• Before you switch the device on again, close the
opening.
Stopping Operation
1. Turn the switch to the "0" position.
2. Wait until the blade comes to a complete stop.
3. Remove the mains plug from the socket.
4. Remove the mixing vessel. Turn it anticlockwise.
5. Take off the lid before pouring.
IMPORTANT NOTE:
Citrus juices and food containing acids should
never be stored in metal vessels.
Cleaning
Operation
off
low rpm
high rpm
=
High speed in pulse mode
39