Table Des Matières - Promise Technology VTrak E-Class E830f Guide De Démarrage Rapide

VTrak E-Class Task List
• Task 1: Unpacking the VTrak (below)
• Task 2: Mounting VTrak in a Rack (page 4)
• Task 3: Installing Physical Drives (page 7)
• Task 4: Making Management and Data Connections (page 11)
• Task 5: Setting Up Serial Cable Connections (page 19)
• Task 6: Connecting the Power (page 20)
• Task 7: Setting up the Management Ports (page 22)
• Task 8: Creating Disk Arrays with WebPAM PROe (page 29)
• Contacting Technical Support (page 35)
For complete information about your VTrak subsystem, see the VTrak E-Class
Product Manual on the CD.
Task 1: Unpacking the VTrak
The VTrak box contains the following items:
• VTrak Unit
• Quick Start Guide
• Left and right mounting rails
• RJ11-to-DB9 serial data cable
• Screws for physical drives
(VTraks that ship without drives)
The electronic components within the VTrak enclosure are
sensitive to damage from Electro-Static Discharge (ESD).
Observe appropriate precautions at all times when handling the
VTrak or its subassemblies.
Use the following categories of network cables with VTrak:
• Cat 6, preferred
• Cat 5E, minimum
• 1.5m (4.9 ft) Power cords (2)
• CD with SNMP files, MPIO files,
RAID console.inf file, Product
Manual, and Quick Start Guide
Warning
Important
3
Task 1: Unpacking the VTrak