Task 8: Creating Disk Arrays With Webpam Proe - Promise Technology VTrak E-Class E830f Guide De Démarrage Rapide

Task 8: Creating Disk Arrays with WebPAM PROe

Setting up WebPAM PROe consists of the following actions:
• Logging into WebPAM PROe (below)
• Choosing a display language (page 29)
• Creating Disk Arrays and Logical Drives (page 30)
• Logging out of WebPAM PROe (page 34)
Logging into WebPAM PROe
1. Launch your Browser.
2. In the Browser address field, type in the virtual IP address of the VTrak
subsystem.
Use the virtual IP address you set in the CLI (page 24) or CLU (page 26).
Note that the IP address shown below is only an example. The IP address
you type into your browser will be different.
Regular Connection
• WebPAM PROe uses an HTTP connection. . . . . . . . . . . . . . . .http://
• Enter the VTrak's IP address . . . . . . . . . . . . . . . . . . . 192.168.20.63
Together, your entry looks like this:
http://192.168.20.63
Secure Connection
• WebPAM PROe uses a secure HTTP connection . . . . . . . . . .https://
• Enter the VTrak's IP address . . . . . . . . . . . . . . . . . . . 192.168.20.63
Together, your entry looks like this:
https://192.168.20.63
The log-in screen appears.
3. On the log-in screen:
• Type administrator in the User Name field.
• Type password in the Password field.
• Optional. Choose a display language from the dropdown menu.
Make a Bookmark (Firefox) or set a Favorite (Internet Explorer) of
the Login Screen so you can access it easily next time.
Task 8: Creating Disk Arrays with WebPAM PROe
Note
29