Promise Technology VTrak E-Class E830f Guide De Démarrage Rapide page 23

If you choose to enable DHCP, have your Network Administrator dedicate an IP
address for the VTrak, linked to the VTrak's MAC address. This action prevents
the DHCP server from assigning a new IP address when the VTrak restarts, with
the result that users can no longer log in.
To access the MAC address for VTrak's virtual management port:
• In the CLU Main Menu, highlight Network Management and press Enter.
Then highlight Virtual and press Enter.
• In the CLI, type net -v and press Enter.
administrator@cli> net -v
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
ActiveCtrlId: 1
MaxSupportedSpeed: 1000Mbps
ProtocolFamily: IPv4(Enabled)
IP: 10.0.0.1
IPMask: 255.0.0.0
MAC: 00:01:55:60:18:60
DNS: 0.0.0.0
Gateway: 0.0.0.0
ProtocolFamily: IPv6(Disabled)
IP: 2001::1
IPMask: ffff::
MAC: 00:01:55:60:18:60
DNS: ::
Gateway: ::
VTrak Default IP Addresses
VTrak uses virtual and physical IP addresses as shown in the table below.
Port
Management
Controller 1
maintenance mode
Controller 2
maintenance mode
Task 7: Setting up the Management Ports
Port: 1
LinkStatus: Up
DHCP: Disabled
DHCP: Disabled
Type
virtual 10.0.0.1
physical 10.0.0.2
physical 10.0.0.3
23
MAC address
Default IP address
IPv4 IPv6
2001::1
2001::2
2001::2