Promise Technology VTrak E-Class E830f Guide De Démarrage Rapide page 26

VTrak E-Class Quick Start Guide
Setting-up VTrak with the CLU
1. At the administrator@cli> prompt, type menu and press Enter.
The CLU main menu appears.
Figure 17.CLU main menu
2. With Quick Setup highlighted, press Enter.
The first Quick Setup screen enables you to make Date and Time settings.
Setting System Date and Time
To set the subsystem's date and time:
Press the arrow keys to highlight System Date .
1.
2. Press the backspace key to erase the current date.
3. Type the new date.
4. Follow the same procedure to set the System Time.
5. Press Ctrl-A to save these settings and move to the Management Port
configuration screen.
Making Virtual Management Port Settings – Manually
To make settings manually:
Press the arrow keys to highlight IP Address .
1.
2. Press the backspace key to erase the current IP Address.
26