Promise Technology VTrak E-Class E830f Guide De Démarrage Rapide page 28

VTrak E-Class Quick Start Guide
Making Maintenance Mode Settings – DHCP
DHCP is supported under IPv4 only.
To let your DHCP server make the settings:
From the CLU Main Menu, highlight Network Management and press Enter.
1.
Highlight Maintenance Mode Network Configuration and press Enter.
2.
3. Highlight the controller you want and press Enter.
4. Highlight DHCP and press the spacebar to toggle to Enabled .
5. Press Ctrl-A to save your settings.
Exiting the CLU
1. Highlight Skip the Step and Finish and press Enter.
Highlight Return to CLI and press Enter.
2.
This completes the Management Port setup. Go to "Task 8: Creating Disk Arrays
with WebPAM PROe" on page 29.
28