Gima LUXOR Notice D'utilisation page 14

Chapter 5:
operatIon
1) When increasing the angle of back part or decreasing the angle of leg part, if fingers
are on the position "1" (as shown by picture 6) the phenomenon of pinching finger
will easily happen.
z
2) When adjusting the height of the bed press the bed adjust bottom till the required
height.
Caution:
• Do not put your hand, foot, head in a position that could block
the adjustment of chair.
• Pay attention not to introduce body parts into moving and/or rotating
components.
• The chair must be used under good stability conditions. The chair must rest
on a flat surface.
• Keep chair still while moving patient on and off of chair because it could
fall over.
• Do not allow patient to climb on chair from back side.
ENGLISH
Back
Armchair
Pillow
14
1
2
N. 6