Ii.6.2. Calibration And Measurement Of The Filling Rate; Ii.6.3. Decoding Of Data - GST Smart bin Manuel

- Via a chargeable web application, with login and password, when the service is provided
by GST
- Via the application of the Lorawan operator chosen by the client
- Any other means deemed equivalent and fulfilling the same function by the client.
II.6.2.
The SBI sensor does not require
battery is installed. There are several methods of self-calibration of the sensor, the user will have
to choose one of these methods which will be specified in the manual provided under
Greensystech GST.
The sensor, for its proper functioning, needs the maximum height of the container (h) which is in
principle supplied by the client to GST and which has programmed it to the sensor. However, in
case of a change in height during the deployment, it is also possible to modify the one already
programmed on the sensor if the operator chosen by the client allows it.
Picture 25: Height h to be measured in the case of a manual calibration
II.6.3.
All versions of SBI transmit a frame structure up to 7 parameters. The data is compressed in
a frame of a proprietary structure
actually measured data only.
7
The frame structure is communicated in a separate document to clients whose data is not processed by GST
Manuel utilisateur - User manual - Simplified version release 1.0
Calibration and measurement of the filling rate
calibration, because it's self-calibrating. It starts when the
Decoding of data
(GST). The filling of the frame structure takes place with the
7
28