Ii.5.2. Indoor Installation On The Top Of The Container; Ii.5.3. Installation Inside A Buried Metal Container; Ii.6. Commissioning; Ii.6.1. Access To A Lorawan Network Required For The Sensor Operation - GST Smart bin Manuel

Figure 24 : 4 holes for internal fixing (2 and 4) and 4 holes for measurements (5 and 6)
II.5.2.
Due to the impossibility for the electromagnetic waves to pass through the metal container
which constitutes a Faraday cage,
container.
II.5.3.
Due to the impossibility for the electromagnetic waves to pass through the metal container
which constitutes a Faraday cage,
container.
II.6. Commissioning
Commissioning is carried out only after the sensor has been installed, regardless of the type of
installation and the mode of supply.
II.6.1.
operation
The Smart Bin Kit (SBI), marketed by GreenSysTech (GST) and intended for remote monitoring
of the filling of dumsters, consists of a self-powered communicating sensor
accessories. This sensor measures and transmits various information from the dumpster (or
container) to a gateway via the LoRaWAN communication protocol several times a day at fixed
or variable frequency (described in paragraph II.2).
The chargeable connection to this network is the responsibility of the client. It is free when the
client invests on its own LoraWan infrastructure (Gateway) that it connects to its ETHERNET
network. Once the sensor information is received via the Gateway by the client's server, the
follow-up of the waste collection fleet takes place in one of the following means:
6
If outdoor version with higher luminosity than critical threshold
Manuel utilisateur - User manual - Simplified version release 1.0
Indoor installation on the top of the container
it is strongly advised not to install the sensor inside a metal
Installation inside a buried metal container
it is strongly advised not to install the sensor inside a metal
Access to a Lorawan network required for the sensor
and its installation
6
27