GST Smart bin Manuel page 22

o L/10 to L/8 of the wall, where L is the length of a container with a rectangular wall
and the side of a container with a square wall (ex: L of 200 cm, installation 20 to 40
cm from the edge with minimum 20 cm for installation on the outer or interior
ceiling.
o 20 cm from the center of the container in the case of fixing to the horizontal bar.
- (2) VERTICALITY:
verticality of the sensor (Z axis).
verticality of the device before final fixation.
Picture 17 : Profile view of sensor in the recommended vertical position
Manuel utilisateur - User manual - Simplified version release 1.0
The measurement reliability of the level of filling imposes the
Therefore, it is strongly advised to the user to verify the
Picture 18 : Bottom view of SBI sensor base
22