Ii.3. Power Mode Of Sbi Sensor; Ii.3.1. Powered By Batteries Lithium Ls14500 Single Source Of Energy - GST Smart bin Manuel

Materials: PC strengthened by FV
-
Closing screws for the housing: M4x20 or M4x25
-
Fixing screws for the housing : M4x60
-
Wireless communication standard:
-
o Lorawan Protocol (LPWA) at 433 MHz, depending on the version (on demand)
o Lorawan Protocol (LPWA) at 868 MHz, depending on the version
Version firmware module Lorawan: 1.0.1
-
Certified compliance with French IoT operators networks:
-
o Orange
o Actility (in progress)
Energy:
-
EITHER BATTERY: By the lithium battery recommended
o
o EITHER HYBRID: Photovoltaic energy and optional backup battery, by the
recommended
Time base of cycles (wake up+ measurements + transmissions + downlink + sleep):
-
o The time base is the time unit that gives rhythm to the sensor cycles is 1 hour
programmed by default (+/- 1%)
II.3. Power mode of SBI sensor
II.3.1.
source of energy
The sensor must be powered by LS14500 battery under the following conditions:
- Absence of photovoltaic light
- Presence of photovoltaic light but below the critical threshold
(example underground dumpsters and containers).
In both cases, it will also be necessary to ensure that the recommended lithium battery2 is
present and that it is sufficiently charged to ensure the power supply of the SBI sensor.
The client must therefore, before the installation of the sensor, insert a LITHIUM LS 14500
battery supplied (with the purchase of a new sensor according to the terms of the sale), at the
location provided for this purpose, while respecting the polarities (+ and -).
4
Composition owner
5
Lithium Battery LS14500
6
The critical brightness threshold is 5000 LUX or 1 Lumen / m2
Manuel utilisateur - User manual - Simplified version release 1.0
4
5 lithium battery, indoor use with brightness below the threshold
Powered by BATTERIES Lithium LS14500 single
5 by GST
as an energy source
6
.
6
19