Fan Operation - Hitachi RAF-25QH8 Mode D'emploi

FAN OPERATION

You can use the device simply as an air circulator. Use this function to dry the interior of the indoor unit
at the end of summer.
FAN SPEED (AUTO)
For the heating operation
For the cooling operation
EXTENDED AIRFLOW
When the (EXTENDED AIRFLOW) button is pressed during operation, the airflow
direction will automatically set according to the type of operation and the fan speed will
change to allow air to blow further. (During cooling operation, fan speed will return to
the original position after 3 hours.)
• If the (EXTENDED AIRFLOW) button is pressed while the AUTO SWING mode is
set, the AUTO SWING mode is cancelled and the EXTENDED AIRFLOW mode is set.
• If the (AUTO SWING) button is pressed while the EXTENDED AIRFLOW mode is set,
the EXTENDED AIRFLOW mode is cancelled and the AUTO SWING mode is set.
• If the (EXTENDED AIRFLOW) button is pressed when the horizontal air deflector
stops at your preferred angle, the deflector will change to EXTENDED AIRFLOW.
• Press (EXTENDED AIRFLOW) button to lower the room temperature quickly when
the temperature is high during the cooling operation.
1
Press the FUNCTION selector so that the display indicates
Press the
(HI)
2
(MED)
(LOW)
(SILENT) : Ultra quiet.
START
Press the
STOP
beep. Press the button again to stop operation.
... When the AUTO fan speed mode is set in the cooling/heating operation:
• The fan speed will automatically change according to the temperature of
discharged air.
• As room temperature reaches the preset temperature, a very light breeze
will blow.
• Operation starts in the "HI" mode to reach the preset temperature.
• As room temperature approaches the preset temperature, fan speed
automatically switches to "MED".
(FAN SPEED) button.
: The strongest air blow.
: Quiet.
: More quiet.
(START/STOP) button. Fan operation starts with a
– 11 –
(FAN).