Operating principle
Time switching function
Temperature control
10
3.4 Scope of delivery
1 Pump
2 Thermal insulation shell
3 2 flat gaskets
4 Wilo-Connector
5 Installation and operating instructions
(not shown)
4 Operating principle
4.1 Application
This circulator is suitable only for drinking water.
4.2 Functions
Up to 3 switch-on/off times can be programmed
using the time-switching function.
Factory setting: 24 hours continuous duty.
The return water temperature is maintained at
the set value using the temperature control. To
do this, the pump is switched on and off auto-
matically.
This function
•
lowers the danger of germ formation in the
circulation system from a set temperature
above 55 °C (DVGW requirement),
•
lowers scale deposits,
•
reduces power consumption.
Factory setting:
Temperature control switched off (no °C).
WILO SE 05/2021