How To Do" Maintenance; Engine Oil Change - WORMS ACCESS j 8-25 Manuel D'utilisation

Masquer les pouces Voir aussi pour ACCESS j 8-25:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

10. "how to do" MAiNtENANcE

10.1. ENgiNE oiL chANgE

Change engine oil every 100 hours. (For new engine, change oil after 20 hours.)
Drain the used oil while the engine is warm. Warm oil drains quickly and completely.
1.
Place a suitable container below the engine to catch the used
oil, then remove the oil filler cap/dipstick and the drain plug.
2.
Allow the used oil to drain completely, then reinstall the
drain plug, and tighten it securely.
3.
With the engine on a level place, fill it to the upper limit with
the recommended oil.
4.
Reinstall the oil dipstick and tighten it.
Use fresh and high quality lubricating oil to the specified level as directed on page 37-38. If
contaminated or deteriorated oil is used or the quantity of the engine oil is not sufficient, the engine
damage will result and its life will be greatly shortened.
Please dispose of used motor oil in a manner that is unharmful to with the
environment. We suggest you take used oil in a sealed container to your
local recycling center or service station for reclamation. Do not throw it in
the trash, pour it in the ground, or down into a drain.
Used engine oil may cause skin cancer if repeatedly left in contact with the
skin for prolonged periods. Although this is unlikely unless you handle used
oil on a daily basis, it is still advisable to thoroughly wash your hands with
soap and water as soon as possible after handling used oil.
Cork
Gasket
Draining
Bolt
Cork
Gasket
Draining
Bolt
High Level
H
47

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Access j 14-40

Table des Matières