WORMS ACCESS j 8-25 Manuel D'utilisation page 44

6. Pull the starter grip lightly until resistance
is felt, the pull it briskly.
Do not allow the starter grip to snap back against the engine. Return it
gently to prevent damage to the starter.
7. If the choke lever was moved to the
CLOSED position to start the engine,
gradually move it to the OPEN position as
the engine warms up.
8. Setting engine speed: After starting the engine, move the throttle lever to the FAST position
for self-priming, and check pump output. Pump output is controlled by adjusting engine speed,
moving the throttle lever in the FAST direction will increase pump output, and moving the throttle
lever in the slow direction will decrease pump output.
44
Recoil Starter
Choke Lever
RUN