Medela SoftShells Mode D'emploi page 6

assembly & use
for both Inverted & Sore Nipple Kits
1. Put the silicone back on the dome. Be
sure it snaps on all the way around.
2. To absorb leakage, place
a foam insert inside, at the
bottom of the SoftShells
Be careful not to cover
the vent holes at the top.
cautIOn:
the foam insert to the baby. Discard this milk.
3. Place the assembled shell inside your bra
with the hole of the silicone back centered
over your nipple. The vent holes on the
dome should be on top; the foam insert at
the bottom. We recommend that you wear
a nursing bra; nursing bras are roomier
and the shell will fit more comfortably.
Home cleaning
for both Inverted Nipple and Sore Nipple Kits
BefOre fIrst use every day
SoftShells
If you have just used the SoftShells, the foam
inserts must be cleaned separately before
sanitizing. Squeeze the milk out of the foam,
then rinse them twice with clean cold water.
Dry them by squeezing between a clean cloth
or paper towel. Separate and place the silicone
back and dome in a small pan filled with cold
water. Distilled water is recommended. Bring the
Large
hole back
for sore
nipples
Do not feed the milk collected in
should be sanitized once a day.
™
.
™
4
Small hole
back for flat,
inverted or
engorgement