Klauke ESG 50 plus Mode D'emploi page 8

Instruction Manual ESG 50 plus
_______________________________________________________________________________________________________________________
Do not use the cord to transport the charging unit or to pull the
plug out of a wall socket with force. Do not insert strange parts
into the ducts of the charging unit.
The charging of the batteries must only be done with charging
units supplied by the manufacturer.
Attention
Do not place the battery in your pocket or in your
toolbox if there are any conductive materials in it
such as coins, keys, tools or other metallic parts.
Pull the plug of the charging unit after charging. Do not
disassemble the charging unit or battery.
In order to safeguard a safe and proper performance of the
charging unit the repair and service of the unit should be made
through our Service Centre.
5.5 Storage and transport of the cutting tool
In order to protect the tool against damages it has to be cleaned
carefully after each use and be put into the transportation case Part
No. MKE 50 which has to be closed safely.
6. Troubleshooting
a.) Flashing of the light diode display (Pos.-No. 6)
=> See chapter 4.3 for more information about the special
functions of the tool.
b.) The tool loses oil.
=> Return the tool to the manufacturer. Do not open the tool and
damage the seals of the tool.
c.) The cutting tool does not reach the final operating pressure.
=> Stop the cutting process. Press the retract button (Pos.-No. 2)
and the operating switch continuously and simultaneously for
about 10 sec. Is the malfunction not be eliminated by this
attempt the tool has to be returned to the manufacturer.
7. Putting out of operation/waste disposal
This unit is subjected to the scope of the European WEEE
(2002/96/EG) and RoHS (2002/95/EEC) directives.
The WEEE directive regulates the collection and the
environmental friendly recycling of electro and electronic units.
Information about this can be found in our home page
www.Klauke.com under 'WEEE & RoHS'.
The RoHS directive bans new electrical and electronic equipment
put on the market which contains more than 0,1 weight percentage
lead, mercury, hexavalent chromium, polybrominated biphenyls
(PBB) or polybrominated diphenyl ethers (PBDE) and 0,01 weight
percentage cadmium per homogeneous material.
Battery cartridges (Pos.-No. 7) must be specially disposed of
according to the EEC Battery Guideline.
Attention
Do not dispose of the unit in your residential waste.
Klauke has no legal obligation to take care of their
WEEE outside Germany unless the product has
been shipped and invoiced from inside your country
by Klauke. Please contact your distributer to find
out more how to get your tool recycled
environmental friendly.
8. Technical Data
Weight of the complete tool:
Cutting force:
Maximum cutting diameter:
Driving motor:
Battery voltage:
Battery capacity
Charging time:
Cutting time:
Cuts per battery:
Hydraulic oil:
environmental temperature:
Sound level:
Vibrations:
Dimensions:
Additional instruction manuals are available free of charge. The part # is
HE.4351_H.
page 8
approx. 4,7 kg (incl. battery)
approx. 50 kN
∅ 50 mm (e.g. 4 x 150 mm² NYY)
direct-current permanent field motor
12 V
3 Ah (RA5)
approx. 1 h (LG4F),
¼ h with Quick-charger (LG 5)
approx. 10 s to 24 s
(depending on the cable size)
approx. 60 cuts (4 x 120 mm² NYY)
approx. 65 ml "Shell Tellus T 15"
-20°C to –40°C
70 dB (A) in 1m distance
< 2,5 m/s²
See Picture 2