System Connections - Panasonic AG-EC4G Mode D'emploi

Precautions for when Connecting the System
Operation becomes possible on the
camera recorder when the power of the
unit is turned off, even if the unit is
connected.

System connections

The unit is connected to a camera recorder or base station for use.
Camera recorder
Monitor
<Notes>
Video is not output from the VIDEO OUTPUT connector of the unit when it is connected to
the base station, and the system mode is set to 1080/23.98PsF, 1080/24PsF, 1080/60i or
720/60p.
When the unit is used in combination with a base station and a camera adaptor
(AG-CA300G; optional), the included 10-pin cable cannot be used to directly connect the unit
to the camera recorder.
E-5
To REMOTE connector
To VIDEO IN
connector
The unit can be used in combination with
the following camera recorders and base
station.
AJ-HPX3700G, AJ-HPX3000G,
AJ-HPX2700G, AJ-HPX2000/2100,
AG-HPX500/502,
AG-HPX300/301/302/304, AJ-HDX900P/E
10-pin cable (included)
ENABLE
DISABLE
WARNING
RECORDER
AWB
ABB
SAVE
BNC cable
CHECK
(Continued)
To CAM/BS
connector
ECU
REC S/S
REW FF
ON
STOP PLAY REC CHK
OFF
USER MAIN 1 USER 2 CHARA
W.BAL CAM A.KNEE GAIN
B ON UP
A
PRST
BARS OFF DOWN
MENU SHUTTER SEL.
ON SS
FIX
OFF OFF
PAINTING
ENABLE
GAIN
BLACK
EXT
M.PED
AUTO
IRIS
MAN
deg SHTR GAIN FILTER
AG-EC4G