Parts and their functions
22. SEL dial
This is used to set the menus. After a
menu has been selected using the dial,
press the dial to enter it. When the menu
is set not displayed, it is used to set the
shutter speed.
23. PAINTING GAIN knob
This is the R/B Gain volume.
24. PAINTING ENABLE switch
It enables operation by the PAINTING
gain and black volume.
25. PAINTING BLACK knob
This is the pedestal volume for the R/G/
B.
26. AUTO IRIS switch
AUTO IRIS ON/OFF switch
<Note>
Set the lens MANUAL/AUTO selector
switch to AUTO.
27. IRIS knob
When the 26. AUTO IRIS switch is ON,
this control adds the control value to, or
subtracts it from, the IRIS LEVEL on the
user menu. This addition or subtraction
is performed over a range of -2 steps to
+2 steps. When the 26. AUTO IRIS
switch is OFF, it is used to adjust the iris
finely.
28. EXT indicator
This lights when a lens extender is used.
29. M.PED knob
This is used to set the master pedestal.
30. Number display LED
The iris value and the gain, shutter
speed or filter positions are displayed on
this LED. Normally, the iris value is
shown but when the gain value, shutter
speed or filter position has been
changed, the respective value is
displayed.
E-9
(Continued)
31. CHECK switch
The gain value, shutter speed, filter
position and iris value are displayed in
this order on the number display LED by
pressing this switch. The iris display is
restored after a prescribed period of time
has elapsed.
32. FILTER indicator
This lights when the filter position is
shown on the 30. Number display LED.
33. GAIN indicator
This lights when the gain value is shown
on the 30. Number display LED.
34. SHUTTER indicator
This is lit when the shutter is displayed
on the 30. Number display LED.
35. DEG indicator
When displaying the shutter in 30.
Number display LED, the displayed
format can be distinguished with the ON/
OFF.
ON: Shutter angle is displayed.
OFF: Shutter speed is displayed. The
¢¢¢¢ part of the shutter speed
value 1/¢¢¢¢ is displayed in the
30. Number display LED.