Assembly; Starting The Machine - Texas A/S ES 300 Mode D'emploi

5. Assembly

Attach the upper section of the
handle to the lower section of
the machine as shown.
Press the two ends together,
fix the 2 bolts trough the holes
and tighten the wing nuts.
Adjust the support grip to the
appropriate height.

6. Starting the machine

Connect to mains electricity and ensure the cable is
correctly secured in the cable holder (C).
To start the machine press safety switch (A) and
activate the start/stop button (B).
Stop the machine by releasing lever start/stop button (B).
Tips:
Do not start the motor before the machine is at the work area.
Always hold the machine securely with both hands.
As the knives moves forward and backwards, the machine will work in a steady and quite
way, and is therefore easy to control.
The most common way to use machine is to allow the knives to work down into the soil
and pull the machine backwards through the area. But machine can also be used in
movements forward and backwards until the soil is well cultivated.
Always tighten the knives before use – use the included tool!
A
B
17
C