Service Information; Storage; Transport; Disposal And Recycling - Parkside PKZ 1000 A1 Traduction Des Instructions D'origine

Load hook
The load hook gets deformed when handled unprofessionally or when overloaded. The
load hook must immediately be replaced if the g dimension reaches the limit value of 26
mm. Safety will not be guaranteed if the above-mentioned provision is not provided.
m Failure to observe the safety is no longer guaranteed.

Service information

Please note that the following parts of this product are subject to normal or natural wear
and that the following parts are therefore also required for use as consumables.
Wear parts*: brake lining set (2 pcs.): 3907405001
* Not necessarily included in the scope of delivery!

11. Storage

Store the device and its accessories in a dark, dry and frost-proof place that is inaccessible
to children. The optimum storage temperature is between 5 and 30˚C.

12. Transport

Transport the device in a suitable container. Pay attention to the security of all chain parts.

13. Disposal and recycling

The equipment is supplied in packaging to prevent it from being damaged in transit. The
raw materials in this packaging can be reused or recycled.
The equipment and its accessories are made of various types of material, such as metal
and plastic. Defective components must be disposed of as special waste. Ask your dealer
or your local council.
G-Neu = 23 mm ±5 %
G-Min. = 22 mm
G-Max. = 24 mm
G-Ersatz nötig = 26 mm
GB/IE 23