LaserLiner Centurium Express Mode D'emploi page 23

Centurium Express / Centurium Express Green
Slope function up to 4° – horizontal
This function deactivates the automatic sensor. Press the AUTO/MAN
button to activate the function. The positioning buttons enable motorised
tilt adjustment. The X- and Y-axes can be independently adjusted. Press
the TILT button to change to the Y-axis. Refer to the illustrations below.
Slope function up to 4° – vertical
When the maximum tilt range of 4° is reached, a warning signal
!
sounds, the prism head stops and the laser flashes. In this case,
reduce the slope angle.
man X-axis
X LED is on
man Z-axis
Z LED is on
Y-axis
± 4°
Y LED is on
Z-axis
Z LED is on
EN
23