Franke FMY 45 MW XS Manuel De L'utilisateur page 9

. SAFETY LOCK
This function is automatically activated to prevent the
oven from being switched on accidentally�
DOOR
Open and close the door, then press
function�
.PAUSE
To pause an active function, for example to stir or turn
the food, simply open the door�
To start it up again, close the door and press
. AUTOMATIC FUNCTIONS
CATEGORIES
When using certain automatic functions, you will
need to select a category for the food you are cooking
in order to achieve the best results�
The reference category corresponds to the number
indicated at the top right of the display�
FOOD
Refer to the table containing descriptions of the
functions for information on all of the categories�
DEGREE OF DONENESS
Most of the automatic functions will prompt you to
select how well done you require the food to be�
The degree of doneness can be altered during
the first 20 seconds of operation after activating
the function: activate the function, then turn the
adjustment knob to select the setting you require�
MID
ACTIONS (STIR OR TURN FOOD)
Certain automatic functions require you to turn or stir
the food, for example, and will pause in order for you
to do so�
TURN
Once the oven has paused cooking, open the door
and carry out the action you are prompted to perform
before closing the door again and pressing
continue with cooking�
Please note: When using the "Defrost" function, the function
will start again automatically after two minutes, even if you
have not turned or stirred the food.
to start the
�
g
to
. RESIDUAL HEAT
In many cases, when food has been cooked, the oven
will activate an automatic cooling process, which will
be indicated on the display�
COOL
To view the clock during this process, press
Please note: Opening the door temporarily interrupts the
process.
. TIMER
When the oven is switched off, the display can be
used as a timer� To activate the function and set the
length of time you require, turn the adjustment knob�
Press to activate the timer: An audible signal will
sound and the display will indicate once the timer has
finished counting down the selected time�
Please note: The timer does not activate any of the cooking
cycles.
To change the time set for the timer, press
then press twice to go back to viewing the current time.
Once the timer has been activated, you can activate
a function as well: The timer will continue to count
down the selected time automatically without having
any effect on the function�
To display again the timer, wait for the end of the
function or stop it by switching off the oven�
EN
�
to pause it and
9