Auto Massage Programs - Human Touch ht 1650 Mode D'emploi Et D'entretien

take

8 Auto Massage Programs

Acupoint Detection
Press before selecting a
manual massage mode.
Massage rollers scan
your back to detect your
accupressure points,
then target the massage
accordingly. Do not adjust
the chair recline angle after
selecting Acupoint, as doing
so causes the Acupoint
detection result to be
inaccurate. Before pressing
the Accupoint button, the
Height must be set to Tall (III)
and the Massage/Comfort
Number must be set to under
3 (see page 20 for more
information about Massage/
Comfort Number).
Auto Program
— Press to
toggle between Auto
Massage Programs
until LED lights next
the desired program.
To bypass Acupoint detection, use the Height button to fine-tune the
massage based on your height.
To activate the chair voice response:
The Voice Response switch is located on the back of the chair backrest.
Switch to the "On" position to activate this feature. When Voice Response
is activated, you will hear an audio response when you select an Auto
Massage Program or Acupoint detection using the remote control.
www.humantouch.com
control
Shoulder Height
— Press
to select tall (III), medium
(II) or short (I), based on
your height, to position the
massage rollers for maximum
comfort.
14
Press to toggle
1
FULL BODY SORE
MUSCLE RELIEF
Includes Acupoint detection
2
SPORTS AND
BACK THERAPY
Includes Acupoint detection
3
LEG/FOOT/HIP
THERAPY
4
NECK/SHOULDERS
RELIEF
Includes Acupoint detection
5
AFTER WORK STRETCH
Before selecting this program, make
sure the foot and calf massager is
deployed and the Voice Response
switch on the back of the chair is set to
On (you will hear further instructions).
6
MORNING WAKE-UP
Includes Acupoint detection
7
NIGHT TIME SOOTHING
Includes Acupoint detection
8
MASSAGE DEMONSTRATION
Includes Acupoint detection