Human Touch ht 1650 Mode D'emploi Et D'entretien page 10

take
www.humantouch.com
a seat
1. Deploy the foot and calf massager
Before deploying the foot and calf massager, be sure the
area in front of the chair is clear of any obstructions.
While sitting in the chair, use the remote control legs-up
button to fully deploy the foot and calf massager.
To accommodate shorter legs, use the remote control
legs-down button to retract the foot and calf massager
back a few inches.
IMPORTANT: The calf massager must be within a few
inches of the fully deployed position to work.
2. Insert your legs into the foot and calf massager
Place your feet all the way into the foot and calf massage
wells. The bottom of your feet and the back of your calves
should be touching the well walls.
Should you accidentally attempt to retract the footrest while
your legs are in the foot and calf massager, the Human Touch
massage chair automatically turns off to protect you from injury.
10
Do not stand or sit on the footrest.
When changing direction (from Recline to Incline and
from Leg Up to Leg Down), there is a slight pause while
the chair gears shift. This is perfectly normal.