ADURO 5-1 Mode D'emploi page 14

1.4 Transportation
When taking your fireplace insert home, please ensure that it travels in an upright position. If you wish to lay it flat, it
is important that you remove all loose parts from the combustion chamber (cast iron grate and loose fireproof tiles)
and remove the ash drawer. Alternatively you could also fill the combustion chamber with excess packaging so the
parts are kept in place.
2.0 Installation of the fireplace insert
You are welcome to install your fireplace insert yourself – but we strongly recommend that you consult your chimney
sweep before you begin the installation. Your dealer can also provide you with installation advice. It is important to
ensure that all local rules and regulations, including ones relating to national and European standards, are complied
with when installing this device.
Please note: You may not begin to use the fireplace insert until it has been inspected and approved by your local
chimney sweep.
Aduro 5-1 Illustration
* Remember to mount the set screws before the insert is placed at the correct position. The set screws are in the
ash drawer.
Secondary air intake
Primary air intake
and ash drawer
Flue deflector (steel)
Setting screws
- 14 -
Roles for an easier
mounting
Flue outlet
cover
Vermiculite tiles