TFA 60.2545 Mode D'emploi page 16

TFA_No. 60.2545_Anleitung
Radio-controlled alarm clock
• Press any button (except SNOOZE/LIGHT) and the alarm
will stop.
• If the alarm is not stopped manually, the ascending
alarm tone automatically turns off after two minutes
and it will be reactivated at the same set time on the
following day.
• The alarm symbol remains on the display.
• When the alarm rings, press the SNOOZE/LIGHT button
and the snooze function is activated.
• Once the snooze function is activated, the snooze sym-
bol will be flashing on the display.
• The alarm will be interrupted for 5 minutes.
• Press the ALARM ON/OFF button to deactivate the
alarm function.
• The alarm symbol disappears and the date appears on
the display.
30
14.03.2018 14:35 Uhr Seite 16
Radio-controlled alarm clock
6. Troubleshooting
Problem Solution
➜ Ensure the batteries'
No display
➜ Change the batteries
➜ Press and hold the WAVE
No DCF reception
➜ Choose another place for
➜ Wait for an attempt recep-
➜ Check if there is any
polarity are correct
button for three seconds to
start the reception manually
your product
tion during the night
source of interference
31