Resetting The System (S4) - DURAVIT ME by Starck 28093100 Série Notice D'utilisation

> Now move away, and take away any objects in the control unit's
range.
Control unit alignment takes approximately 12 seconds, and signal
tones sound during the process. Then, a full flush will occur and the
electronic urinal will be ready for use.
4.2

Resetting the system (S4)

If you reset the system, the chosen programmes and settings are re-
set. Then, you will be able to select programmes and settings again.
Refer to page 2 for a diagram showing the signal sequence.
> Hold the magnetic key in front of the right-hand sensor.
Within approximately three seconds, several short signals will
sound. Then, eight long signals will sound. Between the sixth and
seventh signal tone and between the seventh and eighth signal
tone, a longer, six-second (approx.) pause will occur.
3 s 8x
47