Power Supply; Switch Sensowash On; Operating; Switching The Sensowash On / Off - DURAVIT SensoWash Slim Notice D'utilisation

Power supply

> Connect the main power supply.
®
SensoWash
when it is connected to the power supply. During this time the
"Status LED"
unit can work, all other operations will not work.
Switch SensoWash
Requirement: SensoWash
LED" is red illuminated.
B
> Press "Power"
SensoWash ® is now switched on.
The "Status LED"
All functions can be used.

6. Operating

A video of all operating functions of this shower toilet is available
at duravit.com/vid_sewa_slim.
6.1 Switching the SensoWash
> Press "Power"
A green Status LED indicates "On mode".
> Press "Power"
A red Status LED indicates "Standby mode".

6.2 Shower functions

®
SensoWash
will start "Initialization" for about 15 seconds
flashes green and only "Power"
B
®
on
®
is in the "Standby mode", the "Status
on the seat unit.
D
is green illuminated.
B
Simply use
this QR code
on the seat unit to switch on SensoWash
A
on the seat unit again to switch off SensoWash
A
automatically cleans the retracted spray wand
®
on / off
on the seat
A
®
.
®
.
EN
9