Conduct A System Diagnosis - DURAVIT ME by Starck 28093100 Série Notice D'utilisation

8.2

Conduct a system diagnosis

If there is no flushing or reduced flushing, you can conduct a system
diagnosis to find the fault.
Refer to page 2 for a diagram showing the signal sequence.
> Hold the magnetic key in front of the right-hand sensor.
Within approximately three seconds, several short signals will
sound. Then, six long signals will sound.
> Remove the magnetic key.
Two short signal tones will sound to confirm the system diagnosis.
60
3 s 6x
2x