Steba VG 250 Mode D'emploi page 25

Masquer les pouces Voir aussi pour VG 250:
Table des Matières

Publicité

Safety requirements during usage:
Only use the appliance at a safety plug socket. This should be connected to a earth
leakage circuit breaker
Use the appliance only when it is assembled.
Do not use the grill plate outside of the appliance and never immerse into water.
Never leave the appliance outdoors after usage.
Fat and other grill food can spatter and drop. Therefore do not place the appliance
not directly on sensitive surfaces, e.g. Polished table tops, parquet or carpet.
When using the appliance with stand, be sure that the stand is standing stable,
because the danger of burns when it falls
Be sure that the cable is placed that way that it cannot be pulled or touched during
usage.
Always unplug the appliance and cool it down before the device is carried away.
Never carry it when it is hot.
Unplug the appliance after each usage or before cleaning.
Always place the oil tray bellow the grill plate.
Thermostat:
With the thermostat the temperature of the grill plate can be adjusted.
The Numbers on the thermostat knob have following meaning:
1 = thermostat switched on
2 = keeping warm
3 = grilling with low temperature ( for fish etc.)
4 = grilling on medium temperature (for chicken etc.)
5 = grilling on max. temperature
Control Lamp:
When the appliance is plugged in and the thermostat is adjusted, the control lamp is
shining. When the temperature is achieved, the lamp goes off.
25

Publicité

Table des Matières
loading

Table des Matières