Adjusting The Clock; Air Filter - Zibro P 720 Manuel D'utilisation

Switching on
The timer ON function can be set when the airconditioner is switched off
(stand-by):
• Press
• Set the number of hours desired (1-12) with the aid of
• Press
You can delete the set timer function by pressing the
control.
When the set time is at "00", the timer is switched off. When the Timer
function has been set the light in the button on the front of the device will
switch on.
5

ADJUSTING THE CLOCK

Press the
When the desired time has been set, press the
to save the setting.
TIP!
The light of the display fades when the remote control has not been
used for some time. This is reactivated when you touch any button.
ATTENTION
Avoid the remote control from getting wet. Remove it from the unit
when condensation can occur.
D

AIR FILTER

This airconditioner is fitted with a 3-layer filter to purify the circulating air. The
airconditioners are supplied with a separately packaged 3M
(P726 / P729 / PH733) and activated carbon filter. These filters must be placed in
accordance with the instructions before the airconditioner is used.
1 Wire mesh filter to remove coarse dust particles.
2 3M TM Filtrete TM
your health, such as pollen, bacteria, flakes of animal skin and dust.
3 Activated carbon filter to remove odours.
The mesh filter is part of the filter holder. The filter holder can be opened. The
activated carbon filter and the 3M
1 The mesh filter must be cleaned regularly with a vacuum cleaner in order to
prevent blockage of the air flow.
2 We recommend replacing the positively/negatively electrostatically charged
3M TM Filtrete TM filter every three months.
-button. Change the time by pressing the
filter to remove particles from the air that are detrimental to
TM Filtrete TM
and
on the remote
and
-button again in order
TM Filtrete
filter can be removed.
-button.
TM filter
4
81