Operation/Use - Sissel HEAT WAVE Mode D'emploi

The electric warm water bottle with removable charging unit
SISSEL Heat Wave provides long-lasting, blissful warmth for several hours
®
(depending on application). Just hook up, wait for automatic switch off and enjoy the
warmth. SISSEL Heat Wave is handy, safe, reliable and versatile – use even while
®
travelling. Refilling is not necessary. The automatic switch off function cuts the power
as soon as the operating temperature is achieved. A 3-layer leakage protection
provides extra safety. The pleasant velours soft touch cover enhances the feeling of
warmth.
Features
I
no need to use hot water, no need for dangerous refilling
I
convenient and easy to use: plug in, disconnect, go
I
stays warm up to 2 hours, under covers up to 6 hours
(see safety notice)
I easy to reheat after the product cooled down
I
generously sized
I
reusable, environmentally friendly
I
At the first applications, a temporary characteristic
odor might occur. If desired, air the product before use.
Technical specification
I 500 W, AC 220 - 230 V/50-60 Hz
I
size: approx. 20 x 30 cm
I
material: PVC + mercerization/lint
I
contents: water; gross weight: approx. 1.8 kg, with charging port/gift box

Operation/use

I
Place the SISSEL
®
I
Swipe protective cap left or right to expose charging port.
I First insert the charger into the charging port. Then insert charger
into an electric outlet (220 Volt).
I
Always unplug charger when desired temperature is reached.
I
Remove charger according to illustration. No tearing or pulling of charger.
I
Move the cap (protection cap) to its original position.
Venting
Heat Wave on a smooth and even surface.
A reduction in warming together with an increase in vo-
lume can be corrected as follows: Let the product
cool off completely. Carefully remove the cap of the
transparent valve and apply mild pressure onto the
cover. This way excess air escapes from the inside of the
warming cushion. Now re-insert the cap into the valve.