Sissel HEAT WAVE Mode D'emploi page 5

!
Warning!
can result in injuries or death.
Safety notice
I
The product is for home use and no medical device.
In case of health-related complaints, consult a doctor.
I Please check all components of the SISSEL
(e.g. leakage) prior to every use. Should those exist, do not use the SISSEL
Heat Wave (risk of death) and do not attempt to repair it. Instead, contact your
dealer or discard according to locally valid laws and regulations.
I
For long lasting applications, for example at night, we recommend applying the
Heat Wave not directly on the body. We recommend using the Heat Wave first
during daytime to get acquainted with the heat before you decide to use it at
night. Please note that the risk of skin reactions/burns may increase with age.
Even without direct skin contact, the product offers soothing warmth.
I
Check temperature before use, if it feels uncomfortable (sensitive skin etc.),
let it cool first and wrap a towel around.
I
Adult supervision required at all times.
I When temperature reaches approx. 65° C, the power supply will shut off
automatically to prevent overheating.
I
Unplug charger after charging.
I
Disconnect charger before use.
I
Let the product cool down completely before reheating.
I
Do not tamper with product or charging cord in any way.
I Do not open the product. Do not consume the fluid inside.
I Do not use on infant, animal or incapable person.
I
Do not apply pressure onto the product. Do not sit or lean on it.
I
Do not microwave or heat in any other way as intended.
I
Do not expose the product to, or immerse in, water or any other fluid.
I
Do not use with wet hands or feet.
I Do not use in case of impaired sensitivity and while under the influence
of alcohol or medication.
I
Please retain these instructions for future reference and store at a safe place.
Care instructions
1. Only perform surface cleaning and avoid contact with the plug of the charging
port.
2. Do not wash in a washing machine or by fully immersing in water. Make sure
that the SISSEL Heat Wave is unplugged prior to cleaning. Do not clean the
®
product before it has cooled to room temperature.
3. Clean the SISSEL
®
Gently wipe the surface with the damp wash cloth and repeat as needed.
Let the product dry completely before reusing it.
Storage
I
Make sure the SISSEL
temperature.
I Store the product at a dry and safe place – out of the reach of children.
Wind the cable loosely.
Failure to follow all safety instructions
Please read instructions carefully!
Heat Wave with a damp wash cloth and mild soap water.
Heat Wave is unplugged and has cooled to room
®
Heat Wave for signs of damage
®
®