Grease Filters; Carbon Filter; Lighting - ETNA AB660 Série Mode D'emploi

MAINTENANCE

Grease filters

Carbon filter

Lighting

EN 8
Removing the grease filters
1. Remove the filters one by one by pulling on their release handles.
Replacing the carbon filter
The carbon filter must always be used if the cooker hood is not ducted.
2. Remove the three panels.
3. Remove the grease filters.
4. Attach the carbon filters to the filter.
5. Replace the grease filters.
Note:
• Saturation of the activated charcoal will eventually occur after
prolonged use, depending on the type of cooking and how
frequently the grease filter is cleaned.
• The carbon filter needs to be replaced at least every four months.
• The carbon filter cannot be washed for reuse. Saturated carbon is
not environmentally friendly. Change the filter regularly.
This hood is fitted with a light system. This light system has to be
replaced by an authorized technician. Do not attempt to replace it
by yourself.
The lamp in this household appliance is only suitable for
illumination of this appliance. The lamp is not suitable for
household room illumination.