Cassette Player; Listening To A Tape; Playing A Tape In Various Functions - Sony XR-F5100 Mode D'emploi

Cassette Player

Listening to a tape

1
Press (OPEN) and insert a cassette.
Playback starts automatically.
2
Close the front panel.
If a cassette is already inserted, press (SOURCE)
repeatedly until "FWD" or "REV" appears to
start playback.
The side facing up is played.
The side facing down is played.
To Press
(MODE) (o)
Change the tape's
playback direction
(OFF)
Stop playback
(OPEN) then Z
Eject the cassette
(SEEK) (./>)
Skip tracks
– Automatic [once for each track]
Music Sensor
(SEEK) (m/M)
Fast-forward/
reverse [hold to desired point]
– Manual Search
Note
The AMS function may not work when:
– the blanks between tracks are shorter than 4
seconds.
– there is noise between tracks.
– there are long sections of low volume or quiet
sections.
Playing a tape in various
functions
You can play the tape in various functions:
• REP (Repeat Play) repeats the current track.
• BL SKIP (Blank Skip) skips blanks longer than
8 seconds.
• ATA (Automatic Tuner Activation) turns on the
tuner automatically when fast-winding the tape.
• MTL (Metal) lets you play a metal or CrO
tape.
During tape playback, press the
desired function button repeatedly
until "ON" in the display appears.
Function buttons
(3): REP
(5): BL SKIP
(6): ATA
(SENS): MTL
Example: ATA function
ATA function starts.
To return to normal play mode, select "OFF."
2
9