Montiss CSC623 Mode D'emploi page 26

Operation:
1. Filling the water tank:
Open the tank plug, fill 350ml water and cover the plug;
2. Plug in the appliance to a grounded outlet;
3. Press the power switch; the indicator lights will turn red, it indicates preheating. If the
lights do not illuminate, please check the "troubleshooting" section for more details;
4. The appliance warm-up time is 25 seconds, after the completion of preheating, the
indicator light will turn to be blue, the appliance begins to work;
NOTICE: If power failure in the middle of the warm-up or power-off after the warm-up is
complete, turn the power supply on again, according to the interval of the power is
turned on again, the appliance may repeat the above warm-up operation.
5. When normal cleaning, the steam head has a big rotary angle, not only clean corners but
also can clean lower space.
Cleaning:
Ensure that the product must power off before cleaning.
Empty the water tank after using every time and cleaning the water tank.
How to decalcify the water tank interior:
To clean calcium deposits that builds up inside the water tank, add one or two tablespoons
of white vinegar to the water tank and then shake the contents. Several hours later, then
pour away the water and clean the water.
Caution：do not immerse the appliance in the water.
Cleaning procedure to remove scale:
If your steam mop outputs steam is more slowly than usual or no steam , you may need to
remove lime scale. Lime scale can develop over time on the metal parts and greatly affect
the mop performance. It is necessary to remove lime scale on regular basis every 25-50
26