Technical Data; Electrical Safety; Safety In The Workplace - STAMOS soldering S-LS-66 Manuel D'utilisation

j) WICHTIG: Entfernen und reinigen Sie die Lötspitze:
• mindestens einmal täglich bei leichtem
Gebrauch,
• jedes Mal nach mäßiger und intensiver Nutzung.
• WICHTIG: Wenn eine neue Lötspitze installiert
ist, entfernen Sie alle Ansammlungen im
Befestigungselement. Andernfalls kann die
Lötspitze mit dem Heizelement oder dem
Montageelement verschmelzen.
k) Entfernen Sie die lose Ansammlung an der Lötspitze,
um kaltes Lot zu vermeiden.
l) Längerer Betrieb des Geräts bei hohen Temperaturen
(über 400°C) kann die Lebensdauer der Lötspitze
verkürzen.
m) Reinigen Sie die Lötspitze niemals mit einer Feile
oder einem Schleifmittel.
ENTSORGUNG GEBRAUCHTER GERÄTE
Dieses Produkt darf nicht über den normalen Hausmüll
entsorgt werden. Geben Sie das Gerät bei entsprechenden
Sammel- und Recyclinghöfen für Elektro- und
Elektronikgeräte ab. Überprüfen Sie das Symbol auf dem
Produkt, der Bedienungsanleitung und der Verpackung.
Die bei der Konstruktion des Gerätes verwendeten
Kunststoffe können entsprechend ihrer Kennzeichnung
recycelt werden. Mit der Entscheidung für das Recycling
leisten Sie einen wesentlichen Beitrag zum Schutz unserer
Umwelt. Wenden Sie sich an die örtlichen Behörden,
um Informationen über Ihre lokale Recyclinganlagen zu
erhalten.
DE
08.07.2020
6
U S E R M A N U A L

TECHNICAL DATA

Parameter description Parameter value
SOLDERING SOLDERING
Product name STATION STATION
60W 45W
Model S-LS-66 S-LS-67
Rated voltage [V~]/
230/50
Frequency [Hz]
Power [W] 60 45
Temperature range
200-480
[°C]
Temperature stability +/- 5 °C
Tip resistance [Ω] < 2
Rated current [A] 0,3
Fuse 1 A
Ground potential on
< 5
the tip [mV]
Protection class I
Protection rating IP IP20
Dimensions [mm] 115x145x96 115x140x91
Weight [kg] 1,53 1,46
1. GENERAL DESCRIPTION
The user manual is designed to assist in the safe and
trouble-free use of the device. The product is designed
and manufactured in accordance with strict technical
guidelines, using state-of-the-art technologies and
components. Additionally, it is produced in compliance
with the most stringent quality standards.
DO NOT USE THE DEVICE UNLESS YOU HAVE
THOROUGHLY READ AND UNDERSTOOD THIS
USER MANUAL.
To increase the product life of the device and to ensure
trouble-free operation, use it in accordance with this user
manual and regularly perform maintenance tasks. The
technical data and specifications in this user manual are
up to date. The manufacturer reserves the right to make
changes associated with quality improvement.
LEGEND
The product satisfies the relevant safety
standards.
Read instructions before use.
The product must be recycled.
WARNING! or CAUTION! or REMEMBER!
Applicable to the given situation (general
warning sign).
Wear protective goggles.
Wear a dust mask (respiratory tract protection).
08.07.2020
EN
ATTENTION! Electric shock warning!
ATTENTION! Hot surface, risk of burns!
Only use indoors.
Pb
Soldering with lead-free solder wire.
PLEASE NOTE! Drawings in this manual are for
illustration purposes only and in some details may
differ from the actual product.
The original operation manual is written in German. Other
language versions are translations from the German.
2. USAGE SAFETY
ATTENTION! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury or even death.
The terms "device" or "product" are used in the warnings
and instructions to refer to SOLDERING STATION.

2.1. ELECTRICAL SAFETY

a) The plug must fit the socket. Do not modify the
plug in any way. Using original plugs and matching
sockets reduces the risk of electric shock.
b) Avoid touching earthed elements such as pipes,
heaters, boilers and refrigerators. There is an
increased risk of electric shock if the earthed device
is exposed to rain, comes into direct contact with
a wet surface or is operating in a damp environment.
Water getting into the device increases the risk of
damage to the device and of electric shock.
c) Do not touch the device with wet or damp hands.
d) Use the cable only for its designated use. Never use it
to carry the device or to pull the plug out of a socket.
Keep the cable away from heat sources, oil, sharp
edges or moving parts. Damaged or tangled cables
increase the risk of electric shock.
e) Do not use the device if the power cord is damaged
or shows obvious signs of wear. A damaged power
cord should be replaced by a qualified electrician or
the manufacturer's service centre.
f) To avoid electric shock, do not immerse the cord,
plug or device in water or other liquids. Do not use
the device on wet surfaces.
g) ATTENTION! DANGER TO LIFE! While cleaning, never
immerse the device in water or other liquids.
h) Do not use in very humid environments or in the
direct vicinity of water tanks.
i) Prevent the device from getting wet. Risk of electric
shock!

2.2. SAFETY IN THE WORKPLACE

a) Make sure the workplace is clean and well lit. A messy
or poorly lit workplace may lead to accidents. Try
to think ahead, observe what is going on and use
common sense when working with the device.
b) Do not use the device in a potentially explosive
environment, for example in the presence of
flammable liquids, gases or dust. The device
generates sparks which may ignite dust or fumes.
c) If you discover damage or irregular operation,
immediately switch the device off and report it to
a supervisor without delay.
d) If you are unsure about whether the product is
operating correctly or if you find damage, please
contact the manufacturer's service centre.
e) Only the manufacturer's service centre may make
repairs to the product. Do not attempt to make
repairs yourself!
7