Tool Holder T 18+3 With Fixed Chuck - Festool T18+3 Notice D'utilisation D'origine

10 Tool holder T 18+3 with fixed
chuck
WARNING
Risk of injury
► Remove the battery pack from the power
tool before performing any work on the
power tool.
CAUTION
Risk of injury from hot and sharp insertion
tool
► Do not use any blunt or faulty insertion
tools.
► Wear protective gloves when handling an
insertion tool.
10.1 Chuck [3]
For clamping drill bits and bits with max. shaft
diameter of 1/2" (13 mm).
Clamp tool centrally in the chuck.
3
English
13