7.3.
fluid connections
Warning!
Burns, chemical burns through leaking medium.
•
Prior to the use of aggressive media, the resistance of the
media-wetted parts must be checked. If you are unsure, please
contact your Bürkert Sales Centre.
→
Connect the fluid connections according to required
flow direction (see chart and diagram "Fluid connections").
flow direction
Forward
Reverse
Port 1
Port 2
Fig. 2:
Fluid connections
Type 7616
Installation
port 1
port 2
Input
Output
Output
Input
→
Mount the hose connection as shown in the illustration.
Ferrule
Fig. 3:
Structure UNF
¼ – 28 for fluid connection
7.4.
installation
Installation position: any position
→
Fasten the device.
Use the respective bores for M3 screws
(see figure "Installation").
Rectangular connector
Valve 2
Valve 1
Valve 3
Fig. 4:
Installation
english
Hose
Fitting
Bore hole illustration:
M 3
20.5
Bores forfastening
11