Basic Safety Instructions - Burkert 7616 Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

BasicSafetyInstructions
3.

Basic safeTy insTrucTiOns

These safety instructions do not make allowance for any
contingencies and events that may arise during the installation,
operation and maintenance of the devices.
local safety regulations – the operator is responsible for observing
these regulations, also with reference to the installation personnel.
risk of burns/risk of fire if used continuously through hot
device surface!
Keep the device away from highly flammable substances and
media and do not touch with bare hands.
general hazardous situations.
To prevent injury, ensure the following:
Before loosening the lines and valves, turn off the pressure and
vent the lines.
Before reaching into the device or the equipment,
power supply.
Observe applicable accident prevention and safety regulations
for electrical equipment.
That the system cannot be activated unintentionally.
Installation and repair work may be carried out by authorised
technicians only and with the appropriate tools.
Type 7616
switch off the
After an interruption in the power supply or pneumatic supply,
ensure that the process is restarted in a defined or controlled
manner.
The device may be operated only when in perfect condition and
in consideration of the operating instructions.
The general rules of technology apply to application planning
and operation of the device.
note!
electrostatic sensitive Components / Modules!
The device contains electronic components which react sensitively
to electrostatic discharge (ESD). Contact with electrostatically
charged persons or objects is hazardous to these components.
In the worst case scenario, they will be destroyed immediately or
will fail after start-up.
Observe the requirements in accordance with
DIN EN 61340-5-1 / 5-2 to minimise or avoid the possibility of
damage caused by sudden electrostatic discharge!
Also ensure that you do not touch electronic components when
the power supply voltage is present!
Type 7616 was developed with due consideration given to
accepted safety rules and is state-of-the-art. Nevertheless,
dangerous situations may occur.
Failure to observe this operating manual and its operating
instructions as well as unauthorised tampering with the device
release us from any liability and also invalidte the warranty
covering the device and accessories!
english
7

Publicité

Table des Matières
loading

Table des Matières